>9
4Khf8 ;B5
Tiping hole
Gase /Gottom0
Nntake grill
ZX wire hole
Tass the drain hose through here
Hut the grill
LFX QJFPFLJ NSXUJHYNTS
Ffter connecting the piping3 check the joints for gas leakage with leakage detector5
HFZYNTS
MT\ YT HTSSJHY \NWNSL YT YMJ YJWRNSFQX
F8 Knq rnkhc bnqd vhqhmf 4nq K7b`akd54Khf8;CF5
/80 Hut the wire with a wire cutter or wire4cutting pliers3 then strip the insulation to about 9<mm of the exposed
solid wire5
/90 Ysing a screwdriver3 remove the terminal screw/s0 on the terminal board5
/:0 Ysing pliers3 bend the solid wire to form a loop suitable for the terminal screw5
/;0 Whape the loop wire properly3 place it on the terminal board and tighten securely with the terminal screw
using a screw driver5
G8 Knq rsq`mc vhqhmf4Khf8;CG5
/80 Hut the wire with a wire cutter or wire4cutting pliers3 then strip the insulation to about 87mm of the exposed
strand wiring5
/90 Ysing a screwdriver3 remove the terminal screw/s0on the terminal board5
/:0 Ysing a round terminal fastener or pliers3 securely clamp a round terminal to each stripped wire end5
/;0 Tosition the round terminal wire3 and replace and tighten the terminal screw using a screw driver5
4Khf8 ;C5
Nnsulation
Wtrip
9<mm
<>>?
Wtrip
87mm
Vound
terminal
F8 Xnkhc vhqd
G8 Xsq`mc vhqd
Wcrew with
special washer
Vound
terminal
[ire
Xerminal
board
Wcrew with
special washer
Vound
terminal
[ire