>:
Ffter passing the connection cord and power cable through the insulation tube3 fasten it with the cord clamp3
as shown in Kig597
MT\ YT KN]JI HTSSJHYNTS HTWI FSI UT\JW HFGQJ FY YMJ HTWI HQFRU
4Khf8 <:5
Nnsulation tube
Hord clamp
Yse Z[483 75< to 857 mm thick3 TZH tube as the insulation tube5
JQJHYWNHFQ \NWNSL
HFZYNTS
/80 Qatch the terminal block numbers and connection cord colors with those of the
outdoor unit5
Jrroneous wiring may cause burning of the electric parts5
/90 Honnect the connection cords firmly to the terminal block5 Nmperfect installation
may cause a fire5
/:0 Flways fasten the outside covering of the connection cord with the cord clamp5
/Nf the insulator is chafed3 electric leakage may occur50
/;0 Flways connect the ground wire5
85 NRISSV YRNX WNIJ
BEC FIMOSI RJI ILIHRQKH HOMPONINR GOTD
4Khf8 <;5
Jlectric component box
4Khf8 <<5
Jlectric component box
Vemove the four tapping screws5
HFZYNTS
Io not remove the screws5 Nf the
screws are removed3 the electric
component box will fall5