;:
Nm sgd b`rd ne dwhrshmf bdhkhmf
Tut suspending bracket on the suspending bolt to hang the
unit up5Ge sure to use nut and washer at both end of the
bracket to secure it firmly5
K5 Nnstall unit temporarily
L5 Fdjust the height and position of the unit5
M5 Troceed the procedure I3 J of + Nn the case of no c
gradienter
Tolythene pipe
Rut /Trepared on feild0
[asher /Trepared on feild0
Wuspending bolts
Kasten /double nuts0
Kix the suspending bolt firmly
Kix the washer firmly
[asher /Trepared on feild0
4A5 Tqm`ldms o`mdk hmrs`kk`shnm
FG7@9{FG8=9A
F8 Uqdo`qhmf `mc g`mckhmf vhsg nqm`ldms o`mdk
Srnament panel shall not be placed face down or against wall3 neither on an uneven object5
Ion. t bend carelessly the swing flap3 or problem may occur5
85 Vemove air inlet grille and push down the two bars on the inlet grille /see figure 803 move it close to the
grille and then lift it up for ;<degree /see figure 903 and take off the air inlet grille5
locker
locking hole
filter corner
inlet grille edge
/figure 80
/figure 90
/figure :0
locking hole
locker
remove inlet grille
press bar
95Xake off the filter and press the air inlet grille outer edge with thumb3 and pull out the filter
corner with forefinger3to lift the filter after leaving the locker3 then remove the filter/see figure :05
