Haier HXC-158B, Operation Manual

Page: 10 / 24

2. Count refrigerator accessories accompanied
Check the articles inside the refrigerator against
the packing list; if any difference, contact the
after-sale service.
3. Placing conditions
Leave a gap of 10cm in minimum around the
refrigerator for ventilation and heat dissipation.
4. Adjust bracing foot
Rotate the leveling feet with wrench in clockwise direction to extend them outward and support on
the ground. Make sure the refrigerator will not move during operation.
37
HXC-158B
4 Drawers
HXC-158
Blood Bank Refrigerator
External dimensions (W X D X H)
（
mm
）
Internal dimensions (W X D X H)
（
mm
）
Effective volume
Door
Insulating materials
Compressor
Shelf / Drawer
Refrigeration mode
Outer plate / inner plate
Condenser / evaporator
Refrigerant
Headlamp
Net weight
Temperature of temperature
measurement box
Rated power supply
Rated power / current
Alarm system
Rechargeable battery
560×570×1530
460×370×950
158L
Electrical heating glass door
Hard polyurethane foam (fluorine-free)
Totally enclosed imported compressor
Forced Wind Cooling Circulation
Spraying steel plate / stainless steel plate
Fin / fin
Computer control system
R134a 270g
LED 3W
107kg
4
℃
±1
℃
220V-240V~/50Hz/60Hz
350W/2.6A
High-low temperature alarm, sensor fault alarm, power failure
alarm, low battery alarm and door opening alarm
DC 12 V rechargeable battery
Name
Model
Duration time of power failure alarm 48 hours (when battery is fully charged)
I
Temperature controller
USB function / temperature recorder Optional / optional
Y
Electric shock resistance type
Power connect style
Climate Type
Foaming Agent
Noise Level
4
42dB(A)
CP/IP
Note: Climate Type 4 means the temperature is +30
℃
,the relative humidity is 55%.Technical
information may vary from the appliance that you have just purchased due to technical improvements.
The loading of each shelf Max:10 kg
4 shelves / 4 baskets
Specification
Specification
8
For safety transportation, the bottom of the
product is installed with fixed connecting plate.
Prior to use, users are requested to remove
screws that connect the machine and blocking
and then rotate the fixed connecting plate to hide
it at the bottom of the machine.
To handle the refrigerator before un-packaging,
forklift or package carrier may be used. If the
forklift is used, it shall be inserted at the bottom
of blocking from the front or back of the
refrigerator to move the refrigerator. If the
package carrier is used, it shall pick up at the
bottom of blocking and can only pick up the side
of the refrigerator.
After un-packaging, to handle the refrigerator,
you may push wheels for handling.
During handling, the inclination angle of
refrigerator shall not be greater than 45°.
Preparation before use
1. Remove the packing material and packaging tape
Remove the all packing materials and packaging
tapes for transportation.
> 30cm from the top
> 10cm from
the back
> 10cm from
the left
> 10cm from
the right
Supporting foot
Downward upward