OR-05/18/15
Maximizer
®
97 Owner’s Manual
23
Quality Water International
®
Assembly and Parts
1
2
3
4
Part #
Description
Qty.
Note
1
93223
Injector Throat
1
In conjunction with the injector nozzle it creates the vacuum that draws the
brine solution from the brine cabinet. The center hole should be clear of debris,
round, and undamaged. The throat should be pressed flush into the opening in
the valve. If the throat is removed, it must be replaced with a new one.
2
53224
Injector Nozzle
1
Together with the throat creates the vacuum that draws the brine solution from
the brine cabinet. The small hole in the injector nozzle is the one that creates
the “injection stream” that enters the throat. It is important that this hole is
round, undamaged, and clear of debris. If this hole becomes clogged, do not
use anything (such as metal objects) to clear this opening. Damage may occur.
Use a clean cloth and flush with water. If necessary, a wooden toothpick may
be used. When assembling to the valve, the nozzle hole should line up with the
throat. Flush screen with water to clean. The over-mold gasket seals between
the injector nozzle and the injector cap.
3
93806
O-Ring
1
4
53235
Injector Cap
1
Holds the injector assembly together and seals the assembly to the main
control valve.
Injector
INSERT
WITH RIB AT
9 O’CLOCK
POSITION
Figure 7: Injector Assembly
