I-LS02111
www.hagerco.com
12
Rev 1, 5/16
3.1.13.3.
Add / Modify Service User Access Codes
Use the following code to add or modify service user access codes:
[
＊
] [Master or Manager code] [
＊
] [12] [
＊
] [LLL] [
＊
] [AAAAAAAA]
[
＊
] [AAAAAAAA] [
＊
] [EE] [
＊
]
If the setting is successful, then the buzzer will beep once with a green light. If
the setting fails, then the buzzer will beep three times with a blinking red light.
The setting sequence will be exited if the idle time is more than 20 seconds, or
[#] is pressed to exit immediately.
LLL: User ID; Range 001-500; Type: Service User
AAAAAAAA: Service User Access Code from 4 to 8 digits
EE: Available period of time for Service Access Code; Range 00-24 hours
EE=00 will result in one time use
E.g.: For a Service User Access code of 7777, ID of 3, and available period of time at
4 hours, the complete entry will be as follows:
[
＊
] [Master or Manager code] [
＊
] [12] [
＊
] [3] [
＊
] [7777] [
＊
] [7777] [
＊
] [4] [
＊
]
The Service User Codes can be continuously added as shown in 3.1.13.1 Add /
Modify User Access Codes until finished by hitting [#].
3.1.13.4.
Delete User Access Codes
Use the following code to delete user access codes:
[
＊
] [Master or Manager code] [
＊
] [20] [
＊
] [LLL] [
＊
]
If the setting is successful, then the buzzer will beep once with a green light. If
the setting fails, then the buzzer will beep three times with a blinking red light.
The setting sequence will be exited if the idle time is more than 20 seconds, or
[#] is pressed to exit immediately.
LLL: User ID; Range 001-500; Type: General Access User
User Access Codes can be continuously deleted with this function.
E.g.: To delete User ID #1, #5, & #9, use the entry below:
[
＊
] [Master or Manager code] [
＊
] [20] [
＊
] [1] [
＊
] <<beep>> [5] [
＊
]
<<beep>> [9] [
＊
], and so forth.
3.1.13.5.
Delete Manager Access Codes
Use the following code to delete manager access codes:
[
＊
] [Master code] [
＊
] [21] [
＊
] [LLL] [
＊
]
