8
1
6
3
5
20 cm
New Bi-Size
80X80
90X90
=
=
New Bi-Size
70X90 DX
New Bi-Size
70x90 SX
4
4a
4b
4c
D4
F4
A3
B
G4
2
2a
2b
FASE 1b
FASE 1a
A
Remove the protective film
from the tray.
Attach the drainage column
to the shower tray, and fas -
ten it (fig.2).
Connect the flexible drain
hose
“A3”
(inside the man -
ual pack) to the drainage
column (fig.2).
For models with Turkish
bath, remove the cap from
the drainage column, attach
the hose coupler
“D4”
(in
the Steam kit), making sure
that the “O”-ring stays in
place (fig.2a).
Connect the
“F4 “
hose to
the hose coupler with the
clamp
“G4”
(fig. 2b) .
Screw the nuts
“B”
onto the
feet
“A”
, then insert them
into the appropriate bushes
of the shower tray (fig.3).
Position the shower tray,
depending on the chosen
model, for 70x90 position
on the RH (fig.4b), 70x90 or
80x80 position on the LH
(fig.4c), (fig.4a), checking
that it is perfectly level.
Level the shower tray by ad -
justing its feet, locking them
into the required position
and then adjust the middle
foot (fig.6).
WARNING: The front edge
of the shower tray must not
be less than 20 cm from the
floor (fig.5).
After this phase, it is advis -
able to provisionally con -
nect the drainage pipe and
test for watertightness.
For models with Turkish bath
INSTALLING THE SHOWER TRAY
