12
1
1
B1
A1
3mm
1
PHASE 8
ATTACHING THE FIXED GLASS PANELS
PHASE 7
INSERTING THE CLOSURE
Hold the closure so that it
rests perfectly on the com -
pensator profiles, and use
a 3 mm bit to drill through
the six holes provided in
the profile.
Fasten the closure using the
screws “A1” and the cap
with washer “B1” (fig.1).
Place the closure on the
shower booth and lower it
until the hollow of the lower
profile fastens onto the
shower tray profile.
Make sure that the gasket
“E1” , previously glued to
the fixed profiles of the clo -
sure, does not come free.
Make sure that the closure
is perfectly positioned on
the shower tray.
