3
H M
L
F
4
H
G
1
2
1
3
D1
2
PHASE 14
FASTENING THE FRONT PANEL
PHASE 13
SHOWER BOOTH FASTENING BRACKETS
Remove the protection from
the front panel (fig.1), line
it up with the shower tray
and insert the top edge into
the groove of the closure
(fig.2).
Fasten the panel with the
“D1” screws. Make sure the
panel is properly inserted
in the aluminium edge to
avoid perforating it with the
screws (fig.3).
Move the shower booth near the
wall, check that the structure
is straight and mark the holes
for fastening and the top of the
brackets (fig1). Move the shower
booth away again and drill the
holes with a 6 mm bit. Remove
the brackets “F” and fasten them
to the wall using the dowels “L” ,
the screws “M” and the washers
“H” provided (fig.3).
Connect the hose “A3” to the
drain, run a test cycle for all
functions, checking for correct
operation and perfect water -
tightness.
Position the shower booth
against the wall, making sure
that:
- all the wires are well-positioned
between the shower booth and
the walls;
- all the feet are stable on the
floor.
Fasten the shower booth per-
manently to the wall using the
screws “G” and the washers
“H” (fig.4).
