Habegger HIT 6, Operating Manual, Page: 23 / 32

23
3 Technical data
Rope pulling machine
HIT 6 HIT 10
HIT
10special HIT 16 HIT 32
Nominal pulling force * 6 kN 10 kN 16 kN 32 kN
Overload protection * 9 kN 15 kN 24 kN 48 kN
Nominal rope diameter 6.4 mm 8.4 mm 11.2 mm 16.2 mm
Nominal rope breaking load * 30 kN 50 kN 80 kN 160 kN
Weight of rope
(without hook) 0.16 kg/m 0.25 kg/m 0.41 kg/m 0.90 kg/m
Advance of rope
per double stroke 30 mm 55 mm 60 mm 30 mm
Hand lever force
under nominal load 250 N 300 N 350 N 500 N
Telescope lever, extractable
Length min.
max.
no
450 mm no
655 mm
yes
670 mm
1080 mm yes
670 mm
1080 mm
Inherent weight without rope
Inherent weight without rope 10 special 4.2 kg 6.5 kg
7,1 kg 12 kg 21.5 kg
Dimensions:
Width
Length
Height
100 mm
352 mm
210 mm
100 mm
430 mm
242 mm
120 mm
550 mm
300 mm
150 mm
685 mm
330 mm
Spare shear pins in the jaw-opening lever in the carrying grip
Rope for: HIT 6 HIT 10 HIT 16 HIT 32
Rope Ø 6.4 mm 8.4 mm 11.2 mm 16.2 mm
Minimum rope diameter under nominal
load 5.8 mm 7.6 mm 10.1 mm 14.6 mm
Permissible rope force * 6 kN 10 kN 16 kN 32 kN
Rope breaking load * 30 kN 50 kN 80 kN 160 kN
Calculated rope safety > 5 > 5 > 5 > 5
*
1 kN corresponds approximately to 100 kg
4 Operation
Only persons with appropriate qualifications,
who have been trained in the operation of the
machine and are familiar with it, and who also
know the relevant accident prevention
regulations as well as the operating manual may
be authorized to operate the machine on their
own.