Haag-Streit IM 600, Instructions For Use Manual

Page: 9 / 20

9
DEUTSCH ENGLISH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS
PORTUGUÊS
SVENSKA DEUTSCH ENGLISH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG‑STREIT AG, 3098 Koeniz, Switzerland – HS Doc. No. 1500.7220506.04050 – 2019 – 06
•
Insert the connector plug of the computer cable USB 3.0 (46) in the socket (60).
•
Pull on the braided sleeving taught and mount a cable tie (42) on each end.
•
Connect the headrest cable (41) with the counterpart (40) on the headrest.
•
Mount the table top and place the slit lamp on the table.
•
Connect the computer cable USB 3.0 (46) to the PC.
•
Connect the electric power supply lead (15) to the power supply (14).
•
Connect the power supply connector plug to the power grid.
•
Plug the headrest cable (1) into the lamp head.
40. Connection plug headrest
41. Connector plug headrest / LED illumi‑
nation / RM02
42. Cable tie
43. Braided sleeving
44. Cable headrest / LED illumination /
RM02
45. Power supply cable
46. Computer cable USB 3.0
47. Camera (not shown)
48. Recess on the microscope arm
49. Connector plug camera cable
50. Release module RM02
51. RM02 operational control LED
52. On/Off key
53. Rotating knob, periphery or back‑
ground illumination
54. Rotating knob, slit illumination
55. Selector key A
56. Selector key B
57. Release key RM02
58. Socket camera cable
59. Socket for power supply connec‑
tor plug
60. Socket computer cable USB 3.0
micro B
61. Threaded bolt
62. Pin assignment
63. Cable cover
40
41
42
43
44
45
46
46
47
48
49
50
49
51
52
46
45
44
53
54
55
56
57
56
55
60 58 59 44
61
62
42
63
14 15
4. Startup
4.1 Switching on the device
•
Connect the power supply to the power grid and press the On/Off key (52) on the
release module RM02. The green operational control LED (51) illuminates when
the device is switched on. The camera has no On/Off key and switches on au‑
tomatically when the PC is switched on. The status is displayed by the indicator
light (8).
•
Turn the rotating knob on the slit illumination (54) to a position between '1' and
'10'.
5. Operation
NOTE!
The slit lamp's eyepieces must be adjusted in accordance with the re‑
fraction of the examiner. See instructions for use for the slit lamp BQ
900 or BP 900.
01-IFU_IM600-7220506-04050_eng.indd 9 11.06.2019 16:03:03