7
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
© HAAG‑STREIT AG, 3098 Koeniz, Switzerland – HS Doc. No. 1500.7220506.04050 – 2019 – 06
3. Device assembly / installation
WARNING!
Do not modify this equipment without authorization of the manufacturer.
Installation and repairs may only be performed by trained specialists.
Contact your Haag-Streit representative for installation, repairs and
modification work on the system. The contact details are available at
www.haag-streit.com.
Only original Haag-Streit replacement parts may be used.
•
•
3.1 Placement of adhesive label for the automatic
left/right detection
16.
Protective film
17. Rest of the sticker
18. Roller rail
19. Gliding plate
•
Remove rail cover (5) and place slit lamp aside. Clean surface of table.
•
Remove protective film (16) from the back of the adhesive label. Carefully start at
the corner opposite the black surface.
•
Position the sticker against the right roller rail (18) and the gliding plate (19).
Press firmly on the white/black surface, press away any air bubbles.
•
Carefully tear off the remainder of the adhesive label (17) (the 'positioning tool')
along the perforation.
•
Reassemble the slit lamp and rail cover.
3.2 Connecting the CM02 / CM02BP in the beam path
20. Cover caps
21. Marking points
22. Arrow (lock)
•
Disassemble the breath shield.
•
Remove the black and white cover caps (20).
•
Align the marking points (21) on the upper side of the parts to be connected.
•
Turn the locking ring in the direction of the arrow shown (22) to tighten.
21
20
22
3.3 Weight compensation facility
23. Setting screws weight compensation facility
The slit lamp's crosstree carriage offers the option of bal‑
ancing the weight of the accessory so that the height ad‑
justment on the joystick remains smooth (23). To do so,
please follow the instructions in the instruction manual for
the slit lamp.
23
01-IFU_IM600-7220506-04050_eng.indd 7
11.06.2019 16:03:01
