4
WX5004 AC quick start guide
Further information, such as optional installation, technical specifications, and
configuration procedures are available in the
H3C WX5004 Access Controller Installation
Guide
.
Safety recommendations
WARNING!
Installation and removal of the unit and its accessories must be carried out by qualified personnel.
Read all Safety Instructions supplied with your device before installation and operation.
To avoid device impairment and bodily injury caused by improper use, observe these rules:
Pull the power plug(s) out of the access controller before cleaning it. Do not clean the access
controller using wet cloth or liquid.
Keep the access controller away from water or dampness. Prevent water or moisture from
entering the chassis of the access controller.
Do not place the access controller on an unstable case or desk. The access controller might
be damaged severely in case of a fall.
Ensure proper ventilation of the equipment room and keep the ventilation vents of the access
controller free of obstruction.
Make sure that the operating voltage is the same one labeled on the access controller.
Do not open the chassis when the access controller is operating or when electrical hazards
are present to avoid electrical shocks.
When replacing interface modules, wear the ESD-preventive wrist strap to avoid damaging
the interface modules.
Installation preparations
Before unpacking the package, ensure that the package is not damaged and that it
does not show signs of water damage. While opening the package and removing the
contents, avoid using excessive force.
The accessories vary with the models. For the exact contents of the package, refer to
the packing list. If the contents do not match the packing list, contact your H3C
representative.
