background image

Copyright © 2010, Hangzhou H3C Technologies Co., Ltd. and its licensors 

 

No part of this manual may be reproduced or transmitted in any form or by any means 
without the prior written consent of Hangzhou H3C Technologies Co., Ltd. 

 

The information in this document is subject to change without notice. Every effort has 
been made in the preparation of this document to ensure accuracy of the contents. 
However, the statements, information, and recommendations in this document do not 
constitute a warranty of any kind, express or implied. Hangzhou H3C Technologies Co., 
Ltd. and its licensors shall not be liable for technical or editorial errors or omissions 
contained herein. 

Acknowledgments 

H3C, 

, Aolynk, 

, H

3

Care, 

, TOP G, 

, IRF, NetPilot, Neocean, 

NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, 
VVG, V

2

G, V

n

G, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of 

Hangzhou H3C Technologies Co., Ltd. 

All other trademarks that may be mentioned in this guide are the property of their 
respective owners. 

 

Environmental protection 

This product has been designed to comply with the environmental protection 
requirements. The storage, use, and disposal of this product must meet the applicable 
national laws and regulations. 

 

 

 

 

 

Summary of Contents for WX5004












Reviews: