54
Switch model
Port mode
LED (Mode)
status
LED Status
Description
•
S5130-28S-
PWR-EI
•
S5130-28S-
HPWR-EI
•
S5130-28TP
-PWR-EI
Steady green
(rate mode)
Green
LED
Steady on
The port is operating at 1000 Mbps,
and a link is present on the port.
Flashing
The port is sending or receiving data
at 1000 Mbps.
Off
No link is present on the port, or the
port is not operating at 1000 Mbps.
Yellow
LED
Steady on
The port is operating at 10/100 Mbps,
and a link is present on the port.
Flashing (not
3 Hz)
The port is sending or receiving data
at 10/100 Mbps.
Flashing
yellow (3 Hz)
The port has failed POST.
Off
No link is present on the port, or the
port is not operating at 10/100 Mbps.
Flashing
green (PoE
mode)
Green
LED
Steady on
The port is supplying PoE correctly.
Flashing (3
Hz)
•
The PD power requirement
exceeds the port PoE capacity.
•
The port fails to meet the power
requirement of the PD because
of power insufficiency of the
switch.
Off
The port is not supplying PoE power.
Yellow
LED
Steady on
A non-PD device is attached to the
port, or the port is experiencing a PoE
failure.
Flashing (3
Hz)
The port has failed POST.
Off
The port is not supplying PoE power.
1/10GBase-T autosensing Ethernet port LEDs
•
The S5130-52TP-EI and S5130-52TP-PWR-EI switches provide a double-color (green and
yellow) LED for each 1/10GBase-T autosensing Ethernet port to indicate its operating status.
Table 28 1/10GBase-T autosensing Ethernet port double-color LED description
Status Description
Steady green
The port is operating at 10 Gbps and a link is present on the port.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
The port is operating at 1 Gbps and a link is present on the port.
Flashing yellow
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz)
The port has failed POST.
