21
Figure 28 Completing the device driver installation wizard
Setting terminal parameters
To configure and manage the switch through the console port, you must run a terminal emulator
program, HyperTerminal or PuTTY, on your configuration terminal. For more information about the
terminal emulator programs, see the user guides for these programs.
The following are the required terminal settings:
•
Bits per second
—9,600.
•
Data
bits
—8.
•
Stop
bits
—1.
•
Parity
—None.
•
Flow
control
—None.
Starting the switch
NOTE:
In the BootROM menu of the device, SFP+ or 1/10GBase-T autosensing Ethernet ports cannot be
used to download files.
1.
Before powering on the switch, verify that the following conditions are met:
{
The power cord is correctly connected.
{
The input power voltage meets the requirement of the switch.
{
The console cable is correctly connected.
