50
Table 19 System status LED description
LED mark
Status
Description
SYS
Steady green
The switch is operating correctly.
Flashing green
The switch is performing power-on self test (POST).
Steady red
The switch has failed POST.
Flashing yellow
Some ports have failed POST.
Off
The switch is powered off.
Power module status LED
The S5130-28F-EI switch provides the PWR1 and PWR2 LEDs on the front panel to indicate the
operating status of the power modules.
Table 20 Power module status LED description
LED mark
Status
Description
PWR1/PWR2
Steady green
A power module is installed in the power module slot, and the
power module is outputting power correctly.
Steady yellow
A power module is installed in the power module slot, but the
power module is faulty or not powered on.
Steady red
A power module is installed in the power module slot, but the
power module is faulty.
Off
No power module is installed in the power module slot.
RPS status LED
The S5130-28S-HPWR-EI, S5130-28PS-EI, S5130-28TP-PWR-EI, S5130-52S-EI, S5130-52TP-EI,
S5130-52S-PWR-EI, and S5130-52TP-PWR-EI switches support RPS input and provide an RPS
status LED on the front panel to indicate the RPS operating status.
Table 21 RPS status LED description
LED mark
Status
Description
RPS
Steady green
Both the RPS DC input and the AC input are normal.
Steady yellow
The RPS DC input is normal, but the AC input is disconnected or
has failed.
Off
The RPS DC input has failed, or no RPS is connected.
MODE LED
The S5130-28S-PWR-EI, S5130-28S-HPWR-EI, S5130-28TP-PWR-EI, S5130-52TP-PWR-EI, and
S5130-52S-PWR-EI switches provide a MODE LED. The MODE LED indicates the type of
information that the port status LEDs are showing. You can use the LED mode switching button to
change the indication of the MODE LED.