53
Switch model
Port mode
LED (Mode)
status
Double-color
(green and yellow)
LED Status
Description
•
S5130-52S-
PWR-EI
•
S5130-52TP
-PWR-EI
Steady green
(rate mode)
Steady green
The port is operating at 1000 Mbps,
and a link is present on the port.
Flashing green
The port is sending or receiving data at
1000 Mbps.
Steady yellow
The port is operating at 10/100 Mbps,
and a link is present on the port.
Flashing yellow (not 3
Hz)
The port is sending or receiving data at
10/100 Mbps.
Flashing yellow (3 Hz)
The port has failed POST.
Off
No link is present on the port.
Flashing
green (PoE
mode)
Steady green
The port is supplying PoE correctly.
Flashing green (3 Hz)
•
The PD power requirement
exceeds the port PoE capacity.
•
The port fails to meet the power
requirement of the PD because of
power insufficiency of the switch.
Steady yellow
A non-PD device is attached to the port,
or the port is experiencing a PoE
failure.
Flashing yellow (3 Hz)
The port has failed POST.
Off
The port is not supplying PoE.
•
The S5130-28S-EI, S5130-28TP-EI, S5130-28S-PWR-EI, S5130-28TP-PWR-EI, and
S5130-28S-HPWR-EI switches provide two single-color LEDs for each 10/100/1000Base-T
autosensing Ethernet port to indicate its operating status.
Table 27 Description for the two single-color LEDs for the 10/100/1000Base-T
autosensing Ethernet port
Switch model
Port mode
LED (Mode)
status
LED Status
Description
•
S5130-28S-
EI
•
S5130-28TP
-EI
N/A
Green
LED
Steady on
The port is operating at 1000 Mbps,
and a link is present on the port.
Flashing
The port is sending or receiving data
at 1000 Mbps.
Off
No link is present on the port, or the
port is not operating at 1000 Mbps.
Yellow
LED
Steady on
The port is operating at 10/100 Mbps,
and a link is present on the port.
Flashing (not
3 Hz)
The port is sending or receiving data
at 10/100 Mbps.
Flashing
yellow (3 Hz)
The port has failed POST.
Off
No link is present on the port, or the
port is not operating at 10/100 Mbps.
