48
NOTE:
•
As a best practice, use only H3C SFP/SFP+ transceiver modules and cables for the SFP+ ports.
•
The H3C SFP/SFP+ transceiver modules and cables available for the SFP+ ports are subject to
change over time. For the most recent list of SFP/SFP+ transceiver modules and cables, contact
your H3C Support or marketing staff.
•
For the specifications of H3C SFP/SFP+ transceiver modules and cables, see
H3C Transceiver
Modules User Guide
.
SFP port
The S5130-28F-EI switch provides 24 fixed SFP ports. The S5130-28PS-EI switch provides eight
fixed SFP ports. You can install the FE SFP modules in
and GE SFP transceiver modules
in the SFP ports.
Table 16 FE SFP transceiver modules available for the SFP ports
FE SFP Transceiver
module
Central
wavelength
(nm)
Connector
Fiber diameter
(µm)
Max
transmission
distance
SFP-FE-SX-MM1310-A 1310
LC
Multi-mode, 50/125
2 km (1.24 miles)
Multi-mode,
62.5/125
SFP-FE-LX-SM1310-A
1310
LC
Single-mode, 9/125
15 km (9.32 miles)
SFP-FE-LX-SM1310-D
1310
LC
Single-mode, 9/125
15 km (9.32 miles)
SFP-FE-LH40-SM1310
1310
LC
Single-mode, 9/125
40 km (24.86 miles)
SFP-FE-LH80-SM1550
1550
LC
Single-mode, 9/125
80 km (49.71 miles)
SFP-FE-LX-
SM1310-BIDI
You must
use these
two
transceive
r modules
in pairs.
•
TX:
1310
•
RX:
1550
LC
Single-mode, 9/125
15 km (9.32 miles)
SFP-FE-LX-
SM1550-BIDI
•
TX:
1550
•
RX:
1310
LC
10/100/1000Base-T autosensing Ethernet port
The switch provides 10/100/1000Base-T autosensing Ethernet ports.
Table 17 10/100/1000Base-T autosensing Ethernet port specifications
Item Specification
Connector type
RJ-45
Interface attributes 10/100/1000
Mbps, half/full duplex, MDI/MDI-X autosensing
Max transmission distance
100 m (328.08 ft)
Transmission medium
Category-5 (or above) twisted pair cable
Compatible standards
•
IEEE
802.3i
•
802.3u
•
802.3ab
