38
S5130-28F-EI
Figure 53 Front panel
(1) 100/1000Base-X SFP port
(2) 100/1000Base-X SFP port LED
(3) 10/100/1000Base-T autosensing Ethernet port
(4) 10/100/1000Base-T autosensing Ethernet port LED
(5) SFP+ port
(6) SFP+ port LED
(7) Console port
(8) System status LED (SYS)
(9) Power module 1 status LED (PWR1)
(10) Power module 2 status LED (PWR2)
Figure 54 Rear panel
(1) Grounding screw
(2) Power module slot 1
(3) Power module slot 2
The S5130-28F-EI switch comes with no power module or filler panel in power module slot 1 and a
filler panel in power module slot 2. You can install one or two power modules for the switch as
needed. In
, two PSR150-A AC power modules are installed. For more information about
installing and removing a power module, see "
Installing and removing a power module
."
