14
Figure 19 Connecting the power cord for an AC power module (2)
Connecting the power cord for a PSR150-D1 power module
CAUTION:
•
To connect to a –48 VDC power source, use the power cord shipped with the power module.
•
To connect to an H3C recommended RPS, use a power cord compatible with the RPS.
•
To connect a DC power cord to a –48 VDC power source, identify the positive (+) and negative (-)
marks on the two wires of the power cord to avoid connection mistakes.
To connect the power cord for a PSR150-D1 module:
1.
Correctly orient the connector of the power cord and align it with the power receptacle on the
power module, and insert the connector into the power receptacle. See callout 1 in
.
If you cannot insert the connector into the receptacle, re-orient the connector rather than use
excessive force to push it in.
2.
Fasten the screws on the connector with a flat-blade screwdriver to secure the connector to the
power receptacle. See callout 2 in
.
3.
Connect the other end of the power cord to a –48 VDC power source or an RPS.
Figure 20 Connecting the power cord for a PSR150-D1 power module
