Quick Start (For Soliton)
H3C S3100 Series Ethernet Switches
Chapter 3 Installation
3-19
z
Connect one end of the delivered AC power cable to the
power socket of the RPS power module and the other end to
the socket of an external AC power supply.
3) Check whether the PWR LED on the front panel of the
switch is ON. If yes, the power is properly connected.
Caution:
z
Before powering on the switch, you should properly connect the
grounding cable.
z
The DC power cable should be less than 3 meters long.
z
Only the recommended 12V-RPS DC power supply and power
cables can be used.
3.2.3 Connecting Grounding Cable
Caution:
You should properly connect the switch grounding cable since it is
crucial to the lightning protection and electromagnetic shield (EMS) of
your switch.
The power input end of the switch is connected with a noise filter,
whose central ground is directly connected to the chassis, forming the
