Quick Start (For Soliton)
H3C S3100 Series Ethernet Switches
Chapter 1 Product Overview
1-11
Table 1-3
Description of port status LEDs on S3100 series
Port status
mode LED
Port status LED
Description
BLINKING
The port is in the active state
and there is traffic on the port.
Yellow
LED
(left)
OFF
The port is in the active state
but there is no traffic on the
port.
ON
The port is connected
properly.
The A/L
LED is on
Green
LED
(right)
OFF
The port is not connected or
is incorrectly connected.
ON
The port operates in the full
duplex mode.
Yellow
LED
(left)
OFF
The port operates in the half
duplex mode.
ON
The port rate is 100 Mbps.
The D/S
LED is on
Green
LED
(right)
OFF
The port rate is 10 Mbps.
You can switch the mode of the port status LEDs by pressing the
Mode button. After a switch is powered on, the A/L LED is on initially. If
you press the Mode button, the D/S LED will be on. After that, if you
press the Mode button again within 45 seconds, the A/L LED will be on
again. Otherwise, the A/L LED will automatically be on 45 seconds
later.
