Quick Start (For Soliton)
H3C S3100 Series Ethernet Switches
Chapter 3 Installation
3-5
Front square-holed
bracket
Front
mounting ear
Front mounting
ear
Front panel
Figure 3-3
Fix front mounting ears (2)
III. Use front mounting ears and a tray
Follow these steps to install a switch into a 19-inch standard
cabinet:
1) Wear an ESD-preventive wrist strap to check the grounding
and stability of the cabinet.
2) Fix the delivered tray horizontally in a proper position.
3) Take out the screws which are packed together with the
front mounting ears, and fix one end of mounting ears to the
switch, as shown in Figure 3-2.
4) Place the switch on the tray horizontally, slide the tray into
the cabinet, and fix the other end of mounting ears to the
front brackets with crews and captive nuts, as shown in
Figure 3-3.
