Quick Start (For Soliton)
H3C S3100 Series Ethernet Switches
Chapter 3 Installation
3-14
Note:
z
Remove the cushion, if any, from the dent before installation.
z
To ensure the firmness of installation, be sure to use four
permanent magnets to secure each S3100 switch.
2) Attach the magnet-mounted device to the specified location.
Take care not to get your fingers stuck between because the
magnetism is very huge.
(1)
(2)
(3)
(1) Blind nut in the dent of the switch bottom
(2) Permanent magnet
(3) M3*6 countersunk head screw
Figure 3-12
Magnet mounting
