2-20
Figure 2-35 Connecting the AP to a power injector with a fiber uplink port
Labeling cables
After cable connection, attach labels to each cable as a best practice for future maintenance.
•
Attach a label to both ends of a cable and every certain distance.
•
Use cable flags or cable sleeves to label antenna and Ethernet cables. Use cable flags to label
fiber cables.
•
Use waterproof labels with clear content. Attach labels to proper places where they can be
seen directly.
•
Use transparent waterproof tape to seal outdoor labels.
Verifying the installation
CAUTION:
If the AP is used outdoors, use the waterproof network cables dedicated for outdoor usage and the
enclosure port connected by the network cable should take waterproof treatment.
After the installation is complete, check the following items before powering on the AP:
•
The power source meets the power specification of the AP.
•
The AP is reliably grounded.
•
The Ethernet cables are correctly connected.
•
The cables are correctly labeled.
•
The unused ports on the AP are sealed with waterproof plugs.
1
2
