2-7
Figure 2-9 Securing the AP to the vertical pole
3.
As shown by callout 1 in
, use a T8 Torx screwdriver to loosen the two screws on
the base so that the AP can rotate.
4.
Rotate and adjust the AP until the bubble in the level is in the middle.
5.
Fasten the two screws on the base to fix the rotation shaft of the AP.
Figure 2-10 Adjusting the AP
Mounting the AP on a horizontal pole
1.
Use the U-bolts and pole-mounting brackets provided with the AP to attach the AP to the pole,
and fasten the nuts.
Level
Bubble
1
2
