operation
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh [email protected] created 30.01.2015 printed 30.01.2015 page: 52 of 216
The following table shows the operating steps for running the treadmill via firmware or software h/p/cosmos para control
®
.
Operation of profile mode
Initiation: Running belt is not moving. One of the modes LED
is flashing: (manual, profile, cardio, test)
Step no. Activity
Keys
Response / Display
[01]
Select profile mode
a
or
d
Alteration of the mode (manual, profile, cardio, test)
until
profile is flashing
[02]
Start profile mode
c
profile is illuminated,
speed max. is illuminated
program no. is illuminated
=
indicates max. speed in this profile
!
indicates duration of this profile
$
indicates profile no. 1
[03]
Select profile no. 1 ... 6
a
or
d
$
indicates selected profile no. 1 ... 6
[04]
Start the selected
profile no. 1 ... 6
c
A:
standard (in case of deactivation in the optional functions):
profile is illuminated,
% and step are illuminated alternately
kJ and Watt are illuminated alternately
Running belt accelerates up to the starting speed of the first program step.
5 seconds before the next program step there is an acoustic countdown. Start of
measuring. All displays indicate the actual values. The belt stops automatically
according to the profile duration. The belt can be stopped at any time with the
help of
b
.
B:
In case of activation in the optional functions:
"
indicates: SC 3 (scaling 1 ... 6) is flashing
=
indicates max. speed according to the scaling (in this profile)
speed max. is illuminated
!
indicates time (duration) according to the scaling (in this profile)
With
a
or
d
and then
c
,
the scaling of max. speed, elevation, time and
distance can be changed. In this way more variations can be created from the 6
standard profiles.
Continue with A
[05]
Stop running belt
b
Running belt stops.
(Deceleration time can be adjusted in the optional functions)
