4
5. When the above assembly is done, add the bottom ply sheeting
A37, hold in place with clamps as the glue sets.
6. Then add bulkheads A8, A12, A13 and strengthening plates
A39, use clamps to hold in place as the glue sets.
7. Glue pine wood strips to the bulkheads as shown, once the
glue has set sand the edges of the strips to match the bulkhead
contour.
8. Once sanded to shape add the plywood top sheeting to the
front and rear of the front cockpit opening. Then glue into place
2 x A10, 2 x A11, 2 x A15, and 2 x A16 as shown on the plan
and in the picture.
