3
C. Fuselage Frame Assembly.
1. Make two assemblies using A25 and A26 and glue together
using epoxy glue. Ensure you make a right and a left-hand side.
2. Make two side panels by glueing together the A25/A26 laminate
to part A7, ensure you make a right and left-hand side. Add the
pinewood strip stiffeners as shown on the plan.
3. When the glue has set add the engine mounting box to the two
side panels as shown.
4. Then add the pinewood strip cross braces to the lower bottom
as shown in the picture, and on the plan.
