background image

DVMS 1600/800 Duplex  Getting Started Guide

Document 900.0144 Rev 3.00

1

Contents

Introduction  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - 1

Features   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   1

Installation    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - 2

Before you begin   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   2
Initial installation mandatory steps  -  -  -  -  -  -  -  -  -  -  -   3
Connect to peripherals  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   4
Connect remotely   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   5

Programming    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - 5

Enter Program mode -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   5
Exit Program mode    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   6
User permissions  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   6

Change user passwords  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  6

Change user names and permission levels  -  -  -  -  -  -  -  -  -  6

Clock setup  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   7
Global system parameters   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   8

Global user preferences  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  8

Sequence dwell times for monitor outputs    -  -  -  -  -  -  -  -  8

Video text display -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  9

Transaction text ports    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  9

Remote access   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -

Pan, tilt, and zoom (PTZ) control    -  -  -  -  -  -  -  -  -  -  -  -10

Storage drive partitions    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - 10

Calculate disk space required    -  -  -  -  -  -  -  -  -  -  -  -  -  -10

Calculate how many hours the disk will record   -  -  -  -  -  -11

Set drive partitions   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -11

Timelapse recording   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   1

Holiday recording times  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -13

Event recording    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -   3

Image quality, video loss, and system errors  -  -  -  -  -  -  -  -14

Point of sale interface  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -14

Motion event recording  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -15

Text event recording   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -15

Alarm event recording    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -16

Stop recording alarm  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - 16

Pre-event recording -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -16
Reports   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -17

Create a report    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  - 17

Reset to factory defaults    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -17

Operation   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  18

Start or stop recording   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -19
Live monitoring  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -20
Control PTZ cameras  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -20
Search for clips or images -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -21
Quick report    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -22
Play back the last images   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -22
Save (copy) clips to an archive drive    -  -  -  -  -  -  -  -  -  -22
Save (copy) images to a VCR   -  -  -  -  -  -  -  -  -  -  -  -  -  -22
Start sequencing mode   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -23
View current hard drive capacity   -  -  -  -  -  -  -  -  -  -  -  -24
Hot swap the removable drive   -  -  -  -  -  -  -  -  -  -  -  -  -24
Format the archive drive   -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -25
Format the hard drive    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -25
Reboot (restart) the DVMS  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -25
Reset passwords    -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -  -25
Upgrade the DVMS firmware  -  -  -  -  -  -  -  -  -  -  -  -  -  -25

Contact information   -  -  -  -  -  -  -  -  -  -  -  -  -  25

About this manual

To make the installation and operation as simple as possible, this 
Getting Started Guide has the following sections:

For detailed information, please refer to the DVMS 1600/800 
Duplex DVMS Reference Guide 
on your CD or downloadable from 
the Silent Witness web site.

Installation

Describes how to connect the DVMS 1600/800 unit 
to local peripherals and to a computer (PC) for 
remote operation.

Programming

Covers how to do the initial configuration setup.

Operation

Describes routine daily activities.

Summary of Contents for dvms 1600





























Reviews: