24
June 5, 2003
5.
Press FUNCTION and Camera 1 to start sequencing.
Sequencing will loop through the display options you set.
To stop sequencing, press FUNCTION and Camera 1a second
time.
To manually sequence, press FUNCTION and either Camera 1,
Camera 4, Camera 9, or Camera 16, depending on how you wish
the video to display.
Example
In Quad (2 x 2) mode, press FUNCTION and Camera 4 once to
display cameras 1 to 4. Press FUNCTION and Camera 1a second
time to display cameras 5 to 8. Pressing these buttons a third time
displays cameras 9 to 12, and so on.
View current hard drive capacity
At any time you can see how full your drives are and how your hard
drive capacity is proportioned. Go to the Disks screen (MENU
➤
Storage Setup
➤
Disks).
Hot swap the removable drive
The Hot Swap feature permits you to take out a removable, hot
swappable recording device (IDE or SCSI) from the DVMS 1600/800
unit without having to power-down the DVMS.
To activate this option:
1.
Press FUNCTION and Camera 2. This closes the drive and
displays the message
Remove your hot swap drive now, hit OK
after you have inserted a new drive
.
2.
Power off the front panel drive with the key.
3.
Remove the drive.
4.
Insert the new drive.
5.
Power on the front panel drive with the key.
6.
Select OK.
7.
The message
A new drive was found! Do you wish to format it?
displays. Select Cancel if you do not want to overwrite the
contents or Format if you want to erase the new drive.
WARNING!
Failure to properly activate this option may
result in damaged image clips.
