3.1. DEVICE DESCRIPTION
1.
Control panel
2.
Speaker
3.
Speaker socket
4.
Sensor
5.
Support column
6.
Right handle
7.
Left handle
8.
Stretching rope
9.
Vibrating platform
10. Housing
11.
Adjustable supports
12. I/O switch
13. Fuse reset button
14. Power socket
CONTROL PANEL
A.
Display MODE
B.
Display CAL/BMI
C.
Display SPEED
D.
Display TIME
E.
900S button
F.
500S button
G.
300S button
H.
LOW button
I.
MIDDLE button
J.
HIGH button
K.
MODE button
L.
SPEED “˄” button
M. STOP button
3.2. PREPARING FOR USE
APPLIANCE LOCATION
Keep the device away from hot surfaces. Operate the
device on an even, stable, clean, fire-proof and dry surface
and out of the reach of children and persons with mental
disabilities. Position the device such that you always have
access to the power plug. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details on the product label.
ASSEMBLING THE DEVICE
Step 1
a)
Place the device on an even surface.
b) Lower the long signal cable to the main support
column and connect it to the base signal cable.
Attach the upper part of the cable with tape or ask
someone to hold it.
c)
Attach the lower part of the main column to the base
with 4 screws and washers.
PLEASE NOTE: Make sure that the base signal cable
is not crushed or damaged before attaching the
column to the base.
14
13 12
1
2
3
4
5
6
8
7
9
10
11
q)
In case you feel distressing symptoms such as chest
pain, dizziness, short breath, etc. during training, you
should immediately stop the training and consult the
doctor.
r)
Put the device on a stable, dry and flat surface, taking
care to keep a minimum space of 0,5 m space around
the device.
s)
It is not recommended to use the device without
prior consultation with a doctor by:
•
persons with contraindications from the doctor or
feeling ill,
•
women in the course of menstruation or being
pregnant,
•
persons with serious illnesses,
•
people suffering from diseases such as hypertension,
heart disease, atherosclerosis and cerebral vein
thrombosis,
•
people suffering from osteoporosis,
•
people with a pacemaker or other implanted medical
device.
t)
Do not use the device one hour before or one hour
after a meal as undesirable effects may occur.
u)
PLEASE NOTE The protective foil must be removed
after the device has been assembled.
v)
Keep the device away from moisture and dust.
w)
Consult a physician before use, especially if you have
health problems or are over 35.
x)
Do not jump onto the platform, it may damage the
device.
y)
Only one person at a time can use the device.
z)
Stop exercising when you feel tired or exhausted.
aa) During the first use of the device, gradually increase
the intensity of vibrations and exercise time.
bb) Start the device at the lowest speed and then
gradually increase the speed.
cc) Do not eat or drink while exercising.
dd) Do not exercise when you are hungry.
ee) Drink plenty of water before and after training.
ff)
It is recommended to use the device 2 or 3 times
a day. More frequent use is allowed, but the length
of training should not exceed 10-15 minutes.
gg) Place the device on a stable, flat surface with
adequate protection for the floor or carpet to avoid
damage.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
g)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
j)
Do not move, adjust or rotate the device in the
course of work.
k)
Do not leave this appliance unattended while it is in
use.
l)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m) Do not overload the device. Exceeding the maximum
permissible user weight can damage the product.
n)
Keep the device away from children and animals.
o) Before you start training, consult a doctor in
order to clarify whether there are any health
counterindications.
p) Always do a warm up before you start using the
device.
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is intended to train various muscle groups
thanks to the use of the vibrations it generates and
appropriate exercises.
The user is liable for any damage resulting from
unintended use of the device.
N.
START button
O.
SPEED “˅” button
P.
TIME button
`_qgaq
A
B
C
D
E F
G
I J
H
K
L
M
N
O
P
Step 2
a) Attach 2 lower tube sections to the base of the
platform.
b)
Secure the lower part of the handle tubes to the base
with screws.
10
11
08.01.2019
