GETTING
STARTED
19
Set Up
Tilt Stand
Tilt stand steps
Pull out the
handle sideways
and rotate it.
Place the unit
horizontally,
Or in the tilt
stand position.
Place the handle
vertically for hand
carry.
GDM-8200 Series User Manual
20
Power Up
Power up steps
1.
Connect the power
cord to the AC
Voltage input.
Note
Make sure the ground connector of the power cord
is connected to a safety ground. This will affect the
measurement accuracy.
2.
Push and turn On the
main power switch on
the front panel.
3.
The display shows the model name and the version
for a few seconds.
Example: GDM-8255, V1.0
4.
Then the default setting appears.
Example: DCV, Auto, 1V range
