GVD M1142, Quick Start Manual

Page: 17 / 60

Mobile NVR M1142 Quick Start Guide
11
Take a Tour
Title Description
SATA data connector 1
A 7-pin connector for the data transmission of an 2.5" SATA HDD/SSD which is accessible via the pet
door at the bottom of the mobile NVR.
To install this "internal" SATA HDD/SSD, see Install Internal SATA HDD/SSD on page 14 .
DDR3 SODIMM socket A 204-pin SODIMM socket that supports max. 8GB 1600MHz DDR3 memory module.
SATA power connector 1
A 4-pin connector to supply power to an 2.5" SATA HDD/SSD which is accessible via the pet door at
the bottom of the mobile NVR.
To install this "internal" SATA HDD/SSD, see Install Internal SATA HDD/SSD on page 14 .
Half-size PCIe Mini Card
socket
This socket is provided with x1 PCI Express and supports USB signals. It can be loaded with a WiFi
module of half-size PCIe Mini Card form factor.
A dedicated status LED light is provided on the front panel to light green when WiFi data
transmission is active.
The socket is
associated with
this status LED,
the one on the
right side among
the three.
See also Front I/O Ports on page 4 .
Full-size mSATA socket &
SIM card socket 1
This mSATA socket supports mSATA and USB signals and comes with a SIM card socket. It can be
loaded with a mSATA SSD or a 3G, 4G or GPS module.
A dedicated status LED light is provided on the front panel to light green when data transmission
is active.
The socket is
associated with
this status LED,
the one that is in
the center among
the three.
See also Front I/O Ports on page 4 .