Mobile NVR M1142 Quick Start Guide
8
Take a Tour
Title
Description
Power on/off
delay switch
A rotary switch to control the power on/off delay.
A total of 16 modes are available.
Mode Power-on Delay Power-off Delay Hard-off Timeout
0
ATX mode*
1
AT mode**
2
Remote on/off control***
3
10 secs
10 secs
10 mins
4
10 secs
1 mins
10 mins
5
10 secs
5 mins
10 mins
6
30 secs
1 mins
10 mins
7
30 secs
5 mins
10 mins
8
30 secs
10 mins
10 mins
9
3 mins
1 min
10 mins
A
3 mins
10 mins
10 mins
B
3 mins
30 mins
10 mins
C
10 mins
30 mins
10 mins
D
10 secs
2 hrs
10 mins
E
3 mins
2 hrs
10 mins
F
30 secs
5 hrs
10 mins
*
Mode 0 is the ATX mode that doesn't feature any power on/off delay. When the mobile NVR is set to this mode, only the power
button on the front panel is available to power on/off the mobile NVR.
**
Mode 1 is the AT mode which is the default setting. In this mode, the system auto powers on once DC power is applied. However
the system will try to repeat the power-on cycle if the system failed to boot to OS.
***Mode 2 is a mode dedicated to the remote on/off control featured at the first PoE port from the left at the rear panel of the mobile
NVR. Connect an external latched switch to the DC-in power source (8~35V) and ignition input. When the switch is off, the ignition
signal is asserted to initiate a power-on. When the switch is on, the ignition signal is de-asserted to initiate system shutdown. No
power-on/off delays are available with this mode.
