GVD M1142, Quick Start Manual

Page: 48 / 60

Mobile NVR M1142 Quick Start Guide 42
Use Installation Wizard
16. Read through the onscreen message and select
Yes
or
No
. Then click the
Next
button. See the
following (a) if you select Yes . See (b) if you
select No .
Warning All the hard disk drive(s) present in the
system (except C:\ and D:\ drives) and all
the external USB storage connected to the
system will be formatted if you select
Yes
to continue. If you are not sure about this,
select No to manually create the storage
later as described in Create Storage
Volumes on page 45 .
(a). If you have selected Yes in step 16 , follow
the guide below to proceed.
(1) Click the
Execute
button.
The wizard then proceeds to install the
selected cameras and create sotrage
volume(s). When the camera installation is
through, the wizard shows a prompt.
(2) Click the OK button to close the
prompt.
(3) Back to the wizard, click the Finish
button to finish the configuration
and quit the wizard.
The HD NVR Manager then launches.