Mobile NVR M1142 Quick Start Guide
20
Install a WiFi Module
8. Mount a round washer on the SMA
connector jack from outside the rear panel,
and secure an nut to it.
washer
nut
Mount
first a
washer
and then
a nut.
Note
If the mobile NVR has more than one wireless
modules installed, it is recommanded that
you lay out the antenna wires and the external
antennas as illustrated below:
WiFi
WiFi
3G/4G
+GPS
GPS
3G/4G
7. See the illustration below. Pull the other
end of the antenna wire, which is a SMA
connector jack, through
Antenna aperture 1
on the rear panel of the mobile NVR. Be sure
to meet the flat side of the SMA jack with the
flat side of the antenna hole so the connector
jack won't get stuck.
Arrange the flat side of
the SMA connector to
meet the flat side of the
antenna aperture.
Pull the SMA connector jack through
Antenna
aperture 1
on the rear panel of the mobile NVR.
Antenna
aperture 1
