Mobile NVR M1142 Quick Start Guide
19
Install a WiFi Module
1. Remove the bottom cover from the mobile NVR as described
.
2.
On the motherboard, find the half-size
PCIe Mini Card
socket
as illustrated below.
Half-
size
PCIe
Mini
Card
socket
Half-size
PCIe
Mini Card
socket
Connector's
break
The motherboard of the mobile NVR comes with a half-size
PCI Express Mini Card
socket to carry a WiFi
module. Follow the guide below to install a WiFi module to the mobile NVR:
4. Plug the Wi-Fi module to
the socket’s connector
by a slanted angle. Fully
plug the module, and note
the notch
among the
module's
contact
pins
should
meet the
break of
the connector.
3. Have the WiFi module from
the accessories. The module
is a half-size module of
PCIe
Mini Card
, with two U.FL
connectors.
The module has a notch
among the contact pins.
Two U.FL connectors
5.
Press down and fix the module
in place by fastening two
screws.
Press
6. Have the antenna wire that
goes with the WiFi module.
Connect the antenna wire to
the U.FL connector exactly as
illustrated below.
Connect the antenna wire
to the the U.FL connector
exactly as shown.
