Mobile NVR M1142 Quick Start Guide
17
Remove Bottom Cover
The motherboard of the mobile NVR comes with two
PCI Express Mini Card
sockets and one
mSATA
socket to carry wireless modules such as 3G, 4G, WiFi or GPS modules. However, to access these sockets,
the bottom cover of the mobile NVR has to go. Follow the guide below to remove the bottom cover:
1. Remove the pet door as described in
.
The pet door is removed.
2. From the top cover of the mobile
NVR. Loosen and remove the 4
screws as illustrated below.
3. See the illustration below. From the front panel of the
mobile NVR, remove 5 screws. From the rear panel,
remove 4 screws.
4. Slowly slide the bottom cover by the direction as
illustrated below. When seeing the SATA cables for the
outside-accessible HDD/SDD, disconnect them from
the motherboard. Then continue to slide the bottom
cover until it is fully apart from the mobile NVR.
When the SATA cables
for the outside-accessible
HDD/SSD come to view,
disconnect them from the
motherboard.
