Mobile NVR M1142 Quick Start Guide
14
Install an Internal SATA HDD/SSD
To support two 2.5" SATA HDDs/SSDs, the mobile NVR comes with one internal SATA port and one
outside-accessible SATA port. Follow the guide below to install an internal SATA HDD/SSD to the mobile
NVR. To install an outside-accessible SATA HDD/SSD, see
:
1. Open the pet door as described in
The inside (motherboard) of the mobile NVR
then comes to view.
Part the pet
door from the
mobile NVR.
2. Part the pet door from the mobile NVR.
3. Get a piece of thermal pad from the acessory
box. Remove the protection films from both
sides of the thermal pad. Then place it onto
the inner side of the pet door.
Remove the protection films. Place a
thermal pad onto the inner side of the
pet door.
A thermal pad
