background image

31

1. Video may become pixelated if the video bit rate is too high for your USB drive, 

especially during recordings of high-definition material. If this occurs, try using a faster USB 

drive, or re-format it using the High Speed Format option. Note:This may make the drive 

un-readable in other USB devices.

2. The USB PVR function relies on the use of high quality USB 2.0 drives, and as such may 

not be compatible with some specific USB devices, for example, low-cost USB flash-drives 

with slower memory components, and some USB 3.0 flash-drives (operating in USB 2.0 

mode) may not be compatible with this TV. Also, USB hard-drives need to be low power 

versions (eg. portable types), or must be used with an external power source to prevent 

overloading the USB socket on the TV.

10. Timeshift function

Prepare to record the program

This TV allows you to pause and record the currently watched digital TV program to a USB 

storage device, and to resume viewing at the point where it was paused.

NOTE:

Formatting a USB 2.0 storage device will be needed. Save the original data on your 

USB device before formatting. All the data stored in the USB device will be erased after 

formatting.

USB Drive Storage Format

Follow the Format instructions on page 24 of this Manual to format the USB device and 

allocate the amount of space for the Time Shift function.

NOTE:

The format process will take at least 2 minutes depending on the capacity of your USB 

device. Please do not turn off the power or remove the USB device during formatting. The 

High Speed format option is recommended for better HDTV recording results.

During formatting, a speed test will be done on the USB device. If it fails, it means the USB 

device may not support the Time Shift function. 

Record a paused DTV program to USB storage device

1. While in the DTV input source, check that your USB storage device is plugged into the 

USB port on the side of your TV.

2. Select a DTV channel, then press PAUSE to start the Time Shift function. The TV program 

will be paused on screen; the Time Shift OSD appears and recording commences. Press 

play to playback the time-paused material.

3. Press STOP to stop the Time Shift function and stop recording program.

PVR OPERATION

NOTE:

Please do not unplug the USB storage device when the Time Shift function is activated, as damage to the 

recorded file or the USB storage device may occur. Approximately 4GB of memory buffers about 30-40 

minutes of DTV material.

1.Video may become pixelated during recording when the Video bit rate capability of your USB device 

is too low. If this occurs, try using a higher speed USB drive or reformat the drive using the High Speed

format option.

2.The USB Timeshift function relies on the use of high quality USB 2.0 drives, and as such may not be

compatible with some specific USB devices.

Summary of Contents for GVA18LEDC









































Reviews: