15
REMOTE CONTROL /GETTING STARTED
TELETEXT and SUBTITLES
Teletext is an information system broadcast in certain countries which can be consulted like a
newspaper. It may also offer access to subtitles for viewers with hearing problems or who are not
familiar with the transmission language (Refer to your local TV guides or internet program lists to
determine if Teletext is used in your area.)
Getting Started :
Once you have connected your TV antenna and other AV playback equipment (eg. CD, DVD, Blu-ray
player) to the appropriate input sockets on the rear and side of the TV, you will need to be comfortable
with selecting several basic operations before setting up your TV using the Menu system.
Firstly, the TV has two power modes – Standby and On. In Standby mode, the TV is powered up, but
awaits a “power On” command from either the Remote Control or from the Standby push-button locat-
edon the lower right-hand side of the TV.
To switch the TV from off into Standby mode, activate the main On/Off rocker switch located at the
bottom right side of the TV, and wait for the Red power indicator on the front of the TV to light up.
Then, press the red power button on the Remote Control to fully activate the TV (ie. move from Standby
to On mode). The power LED on the front of the TV will change from Red to Blue when the TV is fully
powered up, and after approx 10 seconds the screen will become active and can be commanded using
the Remote Control.
