16
GETTING STARTED
First Powering on the TV :
When you first power up your TV, (or you reset the TV to its factory settings), it will
automatically enter the TV Auto Tuning mode. This is where the TV searches for
available TV stations and stores the station details it finds. Make sure your TV
antenna is connected before proceeding with this operation.
By default, an On Screen Display will offer a language selection (pre-set to English), so
just press the OK button on the Remote Control to confirm this option. The OK button is
located in the middle of the cursor arrow button area of the Remote Control.
The TV will then offer a selection of countries, with Australia as the pre-set option.
Again press the OK button to confirm this selection. Your TV will now scan through
all the analogue TV (ATV) and digital TV (DTV) stations that it can receive using the
connected antenna. This process may take several minutes, but once completed, the TV
will skip to the first DTV program.
The “radio” channels found during the TV Auto Tuning function are the sound-only
services provided by some TV stations.
Using the Main Menus :
Once the TV has run through the Auto Tune mode and found the available programs,
you will then need to know how to select the relevant input you want (eg. DTV, AV,
HDMI etc), and also how to select and adjust the various Menus that allow you to tailor
the operation of the TV to suit your application.
The following pages marked “Menu Settings” will cover the usage and settings of the
various menus in more detail. Please read them carefully to gain the most benefit from
your TV.
