18
To access the Input Source menu, where you can select ATV or DTV reception, plus
access signals from your connected Audio/Video devices (eg, via AV Composite video,
HDMI, or PC VGA), press the Input Source button located at the top right-hand side
of the cursor selector arrow section of the Remote Control, and once the Input Source
menu appears, use the Up or Down cursor arrow keys to select the desired input, then
press the OK button.
1.CHANNEL MENU
The first item of the MENU is the Channel menu (for ATV or DTV source only). ATV =
Analogue TV, DTV = Digital TV.
1). Auto Tuning:
When Auto Tuning is manually selected via the Channel Menu (rather than when the
TV is first powered On or reset), you will first need to select the Tune Type. You can
select between ATV, DTV, or DTV+ATV searching.
Press to select search type, then press to select country (eg. Australia),
then press the OK
button to start auto tuning.
All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type
is set to DTV+ATV. Any previously stored channels will be deleted after auto tuning is
carried out.
After auto tuning, the receiver will skip to the first DTV channel.
The radio channels are the ones provided by some TV stations.
MENU SETTINGS
