Guzzanti GZ 116, Instruction Book

Page: 316 / 353

Inserting the
ЬoЬЬin
10
When inserting or remoVing the ЬoЬЬin, the needle must Ьe
fully raised.
1. Open the hinged cover.
2. Hold the bobbin case with one hand. lnsert the bobbin so that
the thread runs in a clockwise direction (arrow).
3. Put the thread under the tension spring.
4. Hold the bobbin case by the hinged latch.
5. lnsert it into the shuttle.
Attention:
Turn power switch to off ("O").
1 2
3 4
5