Guzzanti GZ 116, Instruction Book

Page: 329 / 353

23
Sewing on
Ьuttons
lnstall the darning plate. (1)
Change presser foot to button sewing foot.
Position the work under the foot. Place the button on the
marked position and lower the foot. Set the pattern selector
knob on " " and sew a few securing stitches. Select the zig-zag
stitch width according to the distance between the two holes of
the button. Turn the handwheel to check if the needle goes into
the right and the left hole of the button without any obstruction
(adjust the stitch width according to the button). Slowly sew on
the button with about 10 stitches. Select pattern " " and sew a
few securing stitches. (2) (for 2-dial model)
Position the work under the foot. Place the button in the desired
position, lower the foot. Set the pattern selector knob on zig zag
stitch " ". Adjust the stitch width to "3" - "5" according to the
distance between the two holes of the button. Turn the
handwheel to check that the needle goes cleanly into the left
and right holes of the button. Set the pattern selector knob on
straight stitch " ", and sew a few securing stitches. Set the
pattern selector knob on zig zag stitch " ", and slowly sew on
the button with about 10 stitches. Set the pattern selector knob
on straight stitch " ", and sew a few securing stitches. (2) (for 3-
dial model)
lf a shank is required, place a darning needle on top of the
button and sew. (3) For buttons with 4 holes, sew through the
front two holes first (2), push work forward and then sew
through the back two holes as described. (3)
1
2
3