11
.............................
CCEC/ OM Manual GlasStile GSS 1.6 EN
07
.2009
Section 3
Instructions for Use
Instructions for Use
Starting the GlasStile GSS
When the power is switched on, the gate automatically searches for its internal zero position, moving
at a lower speed than normal. The blocking panel then automatically moves to its programmed home
position. The first time the gate is powered up it will move to a factory pre-set home position.
When the internal zero and home positions are being sought the alarm output flashes slowly. When
searching has been completed the closed gate closed output switches.
Reception Control Pass Left/Right (Option)
There are two momentary pushbuttons, one each for PASS LEFT and RIGHT entry, which instantly
affect the rotation of the gate.
The gate opens for as long as the pushbutton remains pressed. Upon release the gate returns to its
home position, where the electro-mechanical brake locks it.
Walkway Details
Fig 3.1 - Walkway Details
