19
.............................
CCEC/ OM Manual GlasStile GSS 1.6 EN
07
.2009
Fig 5.5 - Cladding Fitting Details
8.
Prise the Cladding apart and slide into position.
9.
Fit 2N
O
packing washers and 1N
O
M8 x 25 countersunk screw to each of the 3N
O
positions
through the Cladding into the top of the Rotor Column.
10.
Mount the Top Cover on the centre column, so that the countersunk screws locate in the
keyholes and rotate anti clockwise direction to lock into position.
11.
Align the cladding edge profiles so that they interlock. This is achieved by compressing the
middle of the cladding and engaging the ‘lock’ profile on the bottom edge.
12.
Slot the Retaining Strip into the cladding key slots and slide upwards, taking care that the top
cut out in the Retaining Strip, locates on the screw in the Rotor Column.
Note
– The cladding may need to be compressed together to aid this function.
Lock the Retaining Strip into position using M4 x 8 security fixing.
Top Cover
Glass Wing
Cladding
M8 x 25 countersunk screws
and packing washers
M4 x 8 Top Retaining
Strip screw
M4 x 8 Bottom Retaining Strip screw
Retaining Strip
