9
.............................
CCEC/ OM Manual GlasStile GSS 1.6 EN
07
.2009
Section 2
Product Description
Product Description
The Gunnebo GlasStile GSS is a revolving entrance gate with glazed panels. The gate rotates
clockwise or counter-clockwise to its User Programmed opening positions and then returns to the
home position, where it is locked by an electro-mechanical brake. The gate is activated by impulses to
the driving electronics unit from either a reception area or impulse unit (e.g. card reader) which
determines the direction of rotation.
Any impulse unit with a dry contact closing for between 0.5 - 1.0 seconds can be connected to the
gate. An acknowledgement impulse of completed rotations is given before or after each rotation is
started/complete. The status of the gate is indicated on its volt free alarm output.
The speeds, opening time, drive mode and individual settings of the panels opening and home
positions are set using a special programming unit. In the event of a power failure the programmable
functions are stored in a non volatile memory.
The drive electronics are mounted on a printed circuit board which has connection points for power,
motor, brakes, sensors, impulse units and LED’s.
A 24V DC motor with planetary gears controls the gate. An opto-sensor is connected to the outgoing
shaft by a gear belt. Its function is to monitor the position of the gate.
Fig 2.1
– Typical Unit
